The plugs are press-fitted onto sheet steel or other suitable material of adequate thickness. The ties are inserted into the relative slot on the supports

The buttons are positioned for press-fitting onto a panel of suitable thickness following drilling. The cable ties are inserted into the slot of the button body.

The plugs are press-fitted onto a suitable panel following drilling. The cable ties are inserted into a special guide.

The cable tie mounting base can be separated from the body and replaced with a threaded nut. Can be paired to cable ties with base when required.

These mounting bases with pin allow for full insertion into a wall hole of ∅ 8 mm. The elongated head enables fixture of a bundle of cables while maintaining a distance from the wall surface.

Mounting base designed to be fully knocked into an 8 mm diameter hole. The elongated head featuring an aperture allows setting the cable tie at a distance from the brickwork. Ideally suited for masonry, solid brick, concrete and all solid materials.

For fixing two pipes along a parallel axis and at a constant distance from one another, while housing two 9 mm collars/ties.

Nylon mounting bases to be used in conjunction with screws and plugs (not included in the pack). Made from self-extinguishing natural or black V2 nylon, they feature an entry for cable tie for wall-fixture of cables.

Simple and effective accessories to enable easy installation on smooth grease-free surfaces.

Self-extinguishing nylon, non dual adhesive.  The cables are fixed to the wall by slotting the cable ties through the eyelets. The round shape of the support reduces bulkiness. Applied using crews and anchors.

Self-extinguishing nylon, non dual adhesive.  The cables are fixed to the wall by slotting the cable ties through the eyelets. The square shape of the support reduces bulkiness. Applied using crews and anchors.

Made from self-extinguishing natural or black V2 nylon. The cable tie is inserted through the slot for wall-fixing, cable bundling or other items. The round design optimises overall dimensions. With adhesive. For installation on smooth, grease-free walls.

Made from self-extinguishing natural or black V2 nylon. The cable tie is inserted through the slot for wall-fixing, cable bundling or other items. The square design optimises overall dimensions. With adhesive. For installation on smooth, grease-free walls

Self-adhesive bases facilitating manual detachment and application of single bases.

Made from self-extinguishing natural or black V2 nylon. The spacer pin prevents cables coming into contact with the wall, thereby ensuring electrical insulation.

Made from natural or black self-extinguishing V2 nylon, they feature 4-way entry for cable ties up to widths of 5 mm and thickness of 1.5 mm. The useful dimensions are 20×40 mm, enabling the application of a label or marking in indelible ink.

Made from self-extinguishing natural or black V2 nylon. The special profile of the base enables quick insertion and removal of one or more cables, without the risk of damage to insulation. Suitable for cables up to diameters of 15 mm.