SNAP CABLE TIES
A special cable tie made from self-extinguishing V2 nylon with a specially shaped head to enable fixing by pressure. Used especially in the automotive industry.
Technical data sheet

CABLE TIE WITH ID PLATE 8X25 MM
Cable tie in self-extinguishing V2 nylon. The ID plate, with appropriate markings, enables cable identification.
Technical data sheet

CABLE TIE WITH ID PLATE 35X13 MM
Cable tie made from self-extinguishing V2 nylon. The ID plate, with appropriate markings, enables cable identification.
Technical data sheet

CABLE TIE WITH MAXI ID PLATE 83X51 MM
Nylon cable ties. The ID plate on this cable tie forms an integral part of the head. The dimensions and shape of the plate enable large, highly visible markings.
Technical data sheet

CABLE TIES WITH LOW PROFILE HEAD
The special structure of this cable tie head allows for compact bundle diameter and reduced bulk.
Technical data sheet

CERTIFICAZIONE PRODOTTO
Certificate of Type Approval n°09113/A1 BV file n°ACE 14/725/02 (norma di riferimento IEC 60092).
CABLE TIES WITH SUPPORT
Threaded hole, diameter 7×1.5 mm. For pipes with diameter 16/32 mm.
Technical data sheet

SLOT CABLE TIE
This nylon cable tie 6.6 features a slot on top of the head for positioning the excess tail that, after application, does not need to be cut and can be looped in between the “teeth” on the cable tie for quicker installation.
Technical data sheet

RELEASABLE CABLE TIES
This cable tie with tab enables temporary cable tying/fixing as it can be reused several times.
Technical data sheet

RELEASABLE CABLE TIES WITH EXTENDED TOOTH
The extended locking tooth enables easy re-opening of this cable tie.
Technical data sheet

CABLE TIES WITH EYELET
The cable ties with eyelet are designed to tie cable bundles onto even sharp-edged supports, by rivets or screws inserted through the eyelet.
Technical data sheet
