Made from galvanised steel, these anchors come complete with different accessories. Suitable for fixing to cavity walls. Especially recommended for fixing to ceilings.








Steel plugs with hooks for lightweight installation on the common building materials. Body in white galvanised steel complete with metal washer.








Quick nail plugs for through fixing of sheets, profiles etc. (for sheet metal workers), complete with pre-fitted galvanised steel nails. The body is in zamak (96% ZN – 4%AL) making it suitable for heavy duty fixing requirements. Suitable for use on very compact materials. Cannot be removed after installation.


Brass plugs with metric thread and entirely knurled body. Suitable for compact materials and all types of wood.
Steel through plugs with small expansion ring for heavy loads. Entirely made from galvanised steel with expansion ring. Fixing is ensured by a nut and washer to be fitted on the threaded shaft.
Steel plugs for heavy duty fixing requirements. Recommended for fixing on concrete. High resistance levels. Blank nut, washers and anti-rotation ring.



Wide expansion plugs in steel for heavy loads. Entirely in steel. The screw engages the tapered cone that opens and generates expansion. Complete with various accessories.





Steel plugs for medium to heavy duty fixing requirements. Plugs suitable for fixing on concrete and solid masonry. The special transversal apertures aid quicker fixture.
Chemical anchor in polyester resin, fixture by chemical reaction. Made up of a chemical capsule and a galvanised threaded stud complete with nut and washer. Extension free anchorage effective if the liquid is fluid and the stud is inserted by imparting a rotation motion. In case non-genuine studs are used, they must be cut at 45° on the tip. Ideally suitable for applications on concrete and on all compact materials. Hardening time 10’ at 20°C and 3h at -5°C.



Chemical anchors injectable through a standard silicon gun. Suitable for fixture on porous, perforated, wooden walls and in the presence of water. A perforated bushing is inserted in the hole before injection. After injection of the resin, the threaded stud is inserted, complete with nut and washer. Follow the instructions printed on the cartridge regarding hardening and wait times before use.




Concealed hex plugs. They feature a special expanding nylon plug and hex rod in galvanised steel. Suited for application of pre-drilled shelves in place of traditional visible brackets.
