ME-T cable ties


Cable tie with stainless steel tooth

The ME-T cable tie is made of self-extinguishing polyamide 6.6 (UL94:V2). It consists of a rack-free body with rounded edges and a square head with a stainless-steel tightening tooth that provides greater resistance to cold and greater stability where installations are subject to vibration.

It comes in a wide range of sizes to meet every application need, with tensile strengths in the range: 130N / 13kg and 530N / 53kg

Met cable ties can be applied by hand or with a cable tie tensioning tool.

Certifications

For further information on the product certifications available for each article please write to: info@sapiselco.com


Products Type 21/21S/2/2S, File E160935 (reference standard UL 62275, CSA-C22.2 No.62275, IEC 62275).


Type Approval Certificate ELE325617CS (reference standards IEC 60092-101 and UL 62275).


Certified environmental management system.


Certificate of Type Approval n°09113/D0 BV file n ACE 14/725/02 (reference standard IEC 60092-101).


LR Type Approval Certificate n°LR2139366TA (reference standards UL 62275 and EN 62275).


Test reports n. 650-651.1IS0040/19 and 652-653.1IS0040/19 (reference standard UNI EN 45545-2).

Versions in Special Materials

ME-T cable ties, made of PA6.6, are mixed with additives to create products that meet special application needs.

Modal icon

MATERIAL RESISTANT TO LOW TEMPERATURES

Modal icon

METAL-DETECTABLE MATERIAL

Modal icon

MATERIAL STABILIZED AGAINST UV RAYS

Modal icon

COLOURED NYLON MATERIAL

For further information on ME-T cable ties made with special materials please write to: info@sapiselco.com